Anyone using the original launchpad in qlc without auto map
Can anyone confirm it works in the new midi profiles?
Original Launch pad in qlc
-
Aidan Vogt
- Posts: 26
- Joined: Tue Apr 28, 2015 2:12 am
- Real Name: Aidan Vogt
I tried it and it works however there is no feedback for the LEDs
I am assuming this is because it is an older unit
I am assuming this is because it is an older unit
-
mcallegari
- Posts: 4827
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
What do you mean by "original Launchpad" ??
Can you please post a link to the product page and manual ?
There is an input profile in QLC+, have you tried to use that ?
Can you please post a link to the product page and manual ?
There is an input profile in QLC+, have you tried to use that ?
-
Aidan Vogt
- Posts: 26
- Joined: Tue Apr 28, 2015 2:12 am
- Real Name: Aidan Vogt
hi masimo, thanks for the reply
this is as much info as i can find on the original launchpad and a manual. it is pre the launchpad S
https://verleih.fhstp.ac.at/upload/Nova ... 947087.pdf
this is as much info as i can find on the original launchpad and a manual. it is pre the launchpad S
https://verleih.fhstp.ac.at/upload/Nova ... 947087.pdf
I have been using the input and i can get midi in, however i have no feedback on the surface for the lights in the unit.mcallegari wrote:What do you mean by "original Launchpad" ??
Can you please post a link to the product page and manual ?
There is an input profile in QLC+, have you tried to use that ?
-
maikelboerebach
- Posts: 4
- Joined: Mon May 11, 2015 12:41 pm
- Real Name: Maikel Boerebach
"Original" Launchpad works. It needs the same workaround as the APC Mini for the LED Ouput to work properly.
-
Aidan Vogt
- Posts: 26
- Joined: Tue Apr 28, 2015 2:12 am
- Real Name: Aidan Vogt
Awesomemaikelboerebach wrote:"Original" Launchpad works. It needs the same workaround as the APC Mini for the LED Ouput to work properly.
What is that work around?
Thanks
For the reply
-
janosvitok
- Posts: 1331
- Joined: Mon Apr 13, 2015 7:05 am
- Location: Bratislava, Slovakia
- Real Name: Jano Svitok
- Contact:
Maikel,
do you mean the Note Off/Note On workaround? Should I set the default for Novation Launchpad to Note On (unchecked in the profile)?
Aidan,
Maikel probably means unchecking Note Off in Input profile editor.
do you mean the Note Off/Note On workaround? Should I set the default for Novation Launchpad to Note On (unchecked in the profile)?
Aidan,
Maikel probably means unchecking Note Off in Input profile editor.
-
Aidan Vogt
- Posts: 26
- Joined: Tue Apr 28, 2015 2:12 am
- Real Name: Aidan Vogt
Noob questionjanosvitok wrote:Maikel,
do you mean the Note Off/Note On workaround? Should I set the default for Novation Launchpad to Note On (unchecked in the profile)?
Aidan,
Maikel probably means unchecking Note Off in Input profile editor.
What is the input profile and how don't edit it
-
janosvitok
- Posts: 1331
- Joined: Mon Apr 13, 2015 7:05 am
- Location: Bratislava, Slovakia
- Real Name: Jano Svitok
- Contact:
-
Aidan Vogt
- Posts: 26
- Joined: Tue Apr 28, 2015 2:12 am
- Real Name: Aidan Vogt
is this what you are talking about.
still no lights.
still no lights.
- Attachments
-
-
maikelboerebach
- Posts: 4
- Joined: Mon May 11, 2015 12:41 pm
- Real Name: Maikel Boerebach
Sorry for the late reply.. I really miss e-mail notifications.
You still need to configure the buttons in the Virtual Console and assign specific Values to the mapped output.
You still need to configure the buttons in the Virtual Console and assign specific Values to the mapped output.
-
Aidan Vogt
- Posts: 26
- Joined: Tue Apr 28, 2015 2:12 am
- Real Name: Aidan Vogt
so i used the launch pad last week and the lights just started working.
and i didnt change a think. weird
and i didnt change a think. weird