Button for Scene in Virtual Console

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
hans208
Posts: 12
Joined: Fri Sep 04, 2015 2:10 pm
Location: Germany
Real Name: Hannes

Hi,

I'm having the problem that if a create for example a new project, add a fixture (Eurolite LED PAR64 RGBA), create a new scene with the fixture (Channel 6 to value 3), add a button to the Virtual Console which switches the scene on and off and try then the button, I see in the DMX monitor when I turn it on the value 3 but if I switch it off the value stays. I try then to move the slider in the simple desk down to 0. That works. And if I try to switch my button on again, nothing changes. :|
I am running on OS X 10.11.1 (latest Public Beta).
I had this problem with QLC+ 4.9.1 so I upgraded to the latest version of QLC+ 4.10, but the problem stays.

Does anyone know a solution?

Thanks,
hans208

Btw: Will the Enttec DMX USB Pro work now with 10.11 or are there still problems? Sorry, I'm a bit confused...
Top
janosvitok
Posts: 1331
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:
Contact janosvitok

Problem with button is caused by the fact that Channel 6 is in LTP mode -- see LTP in glossary (also in application help) and/or search this forum.

Problem after simple desk is that simple desk overrides everything. You have to release changes in simple desk to make the button work again (use Image button).
Top
hans208
Posts: 12
Joined: Fri Sep 04, 2015 2:10 pm
Location: Germany
Real Name: Hannes

This works. :D
Thanks a lot,
hans208
Top
Post Reply

Return to “Archive - no new threads please”