Hello first sorry for the spelling mistakes I do not speak English very well I use "google trad."
I have an "APC 40 mk2" in recent days. All buttons "MIDI" are recognized except 2-3-4-5-6-7-8 faders. The 1 and master are very well known but the 7 others not.
Your help would be very useful ... thank you in advance.
ABEL
Problem with "APC40 MK2"
-
janosvitok
- Posts: 1331
- Joined: Mon Apr 13, 2015 7:05 am
- Location: Bratislava, Slovakia
- Real Name: Jano Svitok
- Contact:
change your MIDI plugin channel to OMNI (1-16) in settings
-
bebellaseg
- Posts: 3
- Joined: Wed Sep 23, 2015 5:30 pm
- Real Name: abel ARNOU
I just tried but when I change the single channel fader on the corresponding channel number works. example: Channel 1 + 1 = master fader only; Channel fader 2 = 2 only ext ...
-
bebellaseg
- Posts: 3
- Joined: Wed Sep 23, 2015 5:30 pm
- Real Name: abel ARNOU
I had not seen that one could activate "1-16" !!!! it works ! I'm really happy thank you very much !! You are a pro ! 
-
romainl
- Posts: 2
- Joined: Thu Jan 28, 2016 9:35 pm
- Real Name: Romain
Thanks a lot... I was looking for this option since 4h !
Maybe, it could be better if we can see the "1-16" channel option. If you don't know it exists, you can't fint it, it's realy impossible ! You have to click the down Arrow, you can't see all the options at the same time.
But thanks again !
Maybe, it could be better if we can see the "1-16" channel option. If you don't know it exists, you can't fint it, it's realy impossible ! You have to click the down Arrow, you can't see all the options at the same time.
But thanks again !
-
mcallegari
- Posts: 4827
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Seriously ?romainl wrote:Of QLC or the controller ?
In both of them, it's realy not clear !
The APC40 MK2 is a MIDI device, so you should read the QLC+ MIDI plugin documentation:
http://www.qlcplus.org/docs/midiplugin.html
which says:
MIDI Channel: This is the channel where QLC+ will receive or send data through the MIDI system. MIDI channels can go from 1 to 16. The special "1-16" channel will tell QLC+ to receive or send data on any MIDI channel.