Virtual console buttons created with wizard

[StathisAfou]

Hello. I try to learn qlc+ using tutorials. I connect a stairville moving head but i cant make it work with buttons i add through wizard. In simple desk it works fine but not in virtual console. I try to make button in virtual console step by step as the tutorial show manualy but it doesnt work too.

[mcallegari]

Saying "it doesn't work" doesn't help much to understand what you're doing.

A button in the Virtual Console must have a function attached, so what kind of function are you trying to control ?

[StathisAfou]

https://app.box.com/s/t3ibk2aqbjfubzf6e88clujwvis09e23 https://app.box.com/s/gy7etix6ex653s0o78rpgcv8qum9dee7 https://app.box.com/s/xg7x94mhjsc5sq1cz0r7tzdjhz6hl39t
Here screen photos

[mcallegari]

That don't help either.

I can barely see that you're using Stairville MH-X25. They have a dimmer channel, so have you tried to raise it first ?

Anyway, can you please answer my question instead of replying with screenshots ?
Which function are you controlling ? Which button are you clicking ?

[StathisAfou]

The only thing i do is plug the head with dmx and put it to 1st channel nothing else. I add the device in qlc+ and then i click on siple desk an it work fine. Then i go to virtual console and open the wizard to make automaticly buttons/fixtures (see screenshots) but nothing works.

[pengumaniac]

please attach your qxw

[StathisAfou]

dokimi me koumpia.qxw

(16.36 KiB) Downloaded 43 times

[pengumaniac]

stupid question - did you ever switch into Operate Mode?
oh, and you know, that there is only some Gobo action on your VC?

[StathisAfou]

Of curse i switch. And i know it. After hours of trying sometimes it works for a wile but then stops and didnt work again. Im using windows 10. I cant change it back to windows 7and try because pc is not mine but at my work

[pengumaniac]

As a friend of mine uses to say: 99% of all appearing errors are especially handling errors, unknown specialties in usage.
I personally don't know, how you can say on a maybe heared rattle in gobo selection, if it works or doesn't...
So please, learn also to create some functions to dim & shutter,

Otherwise: you have (perhaps, clairvoyant-globe is on repair...) trouble with FTDI-Chip & its Drivers, look to have atleast CDM v2.10.00 WHQL Certified installed

[StathisAfou]

I try at home on windows 7 and all works perfectly. I save my work and open it on windows 7 and all works very well. Win10 is the problem. Thanks for trying to help. I will wait the new version to try again on win10