Hi,
I've connect my livid base 2 to qlc+. Midi in work correctly but there is no item that I can cross for feedback fonction. Is there a solution ? Thanks
QLC+ 4.9.1 with mac 10.10.4
No feedback with livid base 2
-
mcallegari
- Posts: 4868
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Can you show us your Input / Output panel ?
Are you sure this device can receive MIDI signals sent from a PC ? (I watched some Ableton Live videos and apparently the device only sends signals to the software)
Are you sure this device can receive MIDI signals sent from a PC ? (I watched some Ableton Live videos and apparently the device only sends signals to the software)
-
mcallegari
- Posts: 4868
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Hey, I am not able to download tiff images. Can you please use PNGs ? [EDIT] I've done that for you.
Anyway, MIDI OUT is what you need to send feedbacks. MIDI IN is to receive data.
From your screenshot, I see that QLC+ doesn't detect any output port on the Base 2.
This might indicate that:
- the device must be configured to enable the input channel
- the OSX IAC driver doesn't detect the device MIDI IN. Might be something to enable there as well
Just supposing though...you should be the OSX expert here
Anyway, MIDI OUT is what you need to send feedbacks. MIDI IN is to receive data.
From your screenshot, I see that QLC+ doesn't detect any output port on the Base 2.
This might indicate that:
- the device must be configured to enable the input channel
- the OSX IAC driver doesn't detect the device MIDI IN. Might be something to enable there as well
Just supposing though...you should be the OSX expert here
