I have a set of RGBW Led light bars Blizzard StormChasers...
I want to set the control channel to always be a certain level. I.E. The mode channel, I want its default DMX value to always be 52. I can figure a way to work around it, but I wanted to check with you guys to see how you have handled this situation and to be pointed in the right direction if I am missing something.
Thanks for all you guys do!
Setting Default DMX Values in Fixture Definition Editor
-
Downingj
- Posts: 2
- Joined: Thu Jun 11, 2015 8:39 pm
- Real Name: James
I figured that is probably what I would need to do.
Do you just set a cue up in the simple desk to set the control channel at 52? Then that channel always takes priority in every stack/chase? As long as I have the control channel set to HTP?
Or does the simple disk always take priority of a channel?
Do you just set a cue up in the simple desk to set the control channel at 52? Then that channel always takes priority in every stack/chase? As long as I have the control channel set to HTP?
Or does the simple disk always take priority of a channel?
-
plugz
- Posts: 637
- Joined: Sun Apr 12, 2015 6:30 pm
- Real Name: David
I did not write "Cue" nor "Simple Desk".
Channel Modifier: http://qlcplus.org/docs/channelproperties.html
Your proposition it to have a background cue or a background scene running with the channel @ value 52, this will work too. As long as no other function touches this channel. But you'll have to run your cue/scene/whatever every time you run QLC+.
Channel Modifier: http://qlcplus.org/docs/channelproperties.html
Your proposition it to have a background cue or a background scene running with the channel @ value 52, this will work too. As long as no other function touches this channel. But you'll have to run your cue/scene/whatever every time you run QLC+.