4.9.0 crashes by

besenreuther · Sat Jul 11, 2015 8:20 pm

QLC+ crashes when I try to open the simple view on the attached project.
I supose, it depneds on the 72 Geneeric RGB Fixtures I added.

I need that fixtures to get a good 3D-View with '3D Simple View', when switching to 54 channel mode of the 4 Stairville Show Bar 18x3W RGB to control every of the 18 LEDs individual.

I am using Win 8.
Is this a general bug or any individual problem on my side?

Greetings Udo

plugz · Sat Jul 11, 2015 9:33 pm

Hello,

Crash reproduced here when going to the simple desk tab with your workspace opened.

Thanks for reporting, I'll look into it later.

plugz · Sat Jul 11, 2015 10:09 pm

Found the root cause of the crash.

Here's a fixed workspace file, explanations will come later.

udobes · Sat Jul 11, 2015 10:24 pm

Yes, it works.
Thanks.
Udo

plugz · Sat Jul 11, 2015 10:27 pm

Also, you won't have to create all those RGB fixtures if you add heads in your fixture definition.

plugz · Sun Jul 12, 2015 10:07 am

Fixed in GIT: https://github.com/mcallegari/qlcplus/c ... ad8a02c383

Thanks

udobes · Sun Jul 12, 2015 4:54 pm

Hi,
I can't find information about head definition, could you help me, how this works?

I'm using this definition to get a 3D view with '3D Easy View', there the head definition from QLC isn't known.

Udo

plugz · Sun Jul 12, 2015 5:27 pm

Hello,

There is no "3D view" in QLC+, only a 2D Monitor (unless you post from the future, but I doubt that)

The head definitions are done in QLC+ Fixture Definition Editor, when editing the Mode of the fixture.

http://qlcplus.org/docs/fixturedefinitioneditor.html
http://qlcplus.org/docs/modeeditor.html
http://qlcplus.org/docs/headeditor.html

As an example, I've completed the 18-channels mode of your fixture.

udobes · Sun Jul 12, 2015 6:34 pm

Thanks for your help.
It looks good. But the animatiion wizzard doesn't handle the heads correct.

For 3D view I use the '3D Easy View' programm, it works fine.
http://www.nicolaudie.com/de/easyview.htm
There I defined a RGB fixture for each head and got a fine view of my stage.

In QLC I found no difference by defining 72 RGB fixtures or defining 4 show bars with 18 heads each, except the problem at the beginning of that threat and the animation wizzard.

Udo