Velleman VM116 Support

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
zoran8000
Posts: 5
Joined: Tue Apr 21, 2015 9:18 am
Real Name:

Hi all,

I tried to make my Velleman VM116 device works with QLC+, but unfortunately I didn't manage to.
Is it supported on recent version of QLC+ ?

I put all DLL and EXE in all folders (as I found in forums) but no way...

I can't even manage to list "Velleman" in the Input/output window...

Thanks for your lights... :)
Top
User avatar
mcallegari
Posts: 4825
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

Hi, most likely a duplicate of these (please search the forum first):
viewtopic.php?f=5&t=8389
viewtopic.php?f=5&t=7297&p=30885
viewtopic.php?f=7&t=1795&p=8870

Note that the DLL must have a precise name. If I remember, all letters in caps.

In any case, I'm not sure it will work. It's a quite old device and in the meantime a lot of things changed...especially on Windows
Top
zoran8000
Posts: 5
Joined: Tue Apr 21, 2015 9:18 am
Real Name:

All of that did not worked.

I searched the forum at first sight, but all I found were not functiionnal.

Il finally manage to have a workaround : using a VM with OLA.
- OLA setup in a VM with Ubuntu 11.04 through VirtualBox.
- Velleman connected with virtual usb port on tha VM
- QLC+ send to OLA via ArtNet ; then OLA send data to Velleman K8062.

I tried it without DMX devices connected to, I can only see the Red led blinking to notify that some DMX data is routed from Velleman K8062.
I'll try this week and give you back the results.
Top
Post Reply

Return to “Archive - no new threads please”