RPi - Trigger a show with line command

All the topics related to QLC+ on the Raspberry Pi
Post Reply
MatB
Posts: 2
Joined: Tue Apr 28, 2015 1:24 pm
Real Name: Mathieu Bile

Hi guys,

First of all, a big thanks for this little program which is amazing. I'm still new to it but I'am working hard to as much as I can ;)

For the project I'm working on, I was wondering if it was possible to trigger a show (already setup within QLC+) with a command (straight in the terminal) instead of using a DMX controller. Do you think it is possible ?

I've checked in the forum if I could see something similar but didn't find any, sorry in advance if this subject has been already covered :)

Thank you all. Cheers.
Top
janosvitok
Posts: 1330
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:
Contact janosvitok

You can mark a function to start automatically when QLC+ switches to operate mode + if you start qlcplus with -k and -p switches
the show will start right away.

See also: viewtopic.php?f=5&t=8347

and viewtopic.php?f=5&t=7754
original attachments here: https://sourceforge.net/p/qlcplus/discu ... it=25#9cd1
Top
MatB
Posts: 2
Joined: Tue Apr 28, 2015 1:24 pm
Real Name: Mathieu Bile

Thank you for all your informations!

Sounds like what I need, I will look into it!
Top
Post Reply

Return to “Raspberry Pi”