Just a couple of things in an otherwise excellent feature.
1) When remapping one complete fixture to another similar complete fixture, some peculiar things happen with generic intensity channels.
a) Remapping one 12-channel dimmer pack onto another 12-channel dimmer pack results in all 12 channels of the first being remapped on channel 1 of the second.
b) When remapping one 7-channel LED fixture (Ledj Alu Quad Par64) to another, the master (generic) intensity channel gets remapped (together with the original white intensity channel) onto the white intensity channel of the second fixture.
2) I needed to swap our dimmer pack DMX 1-12 for dimmer pack DMX 25-36. Unfortunately, DMX addresses of the demultiplexers can't be reset without taking the the backs off the cabinets.
If one wants remapping just this one fixture, one unfortunately has to remap all the other fixtures in the project onto themselves (about 150 channels in this case).
Would it be possible to add a button for adding all the fixtures one did not have to remap straight into the remapped project?
Remapping fixtures in 4.5.0 - a couple of problems
-
Massimo Callegari
Hi Michael, yes, I will add a button to copy and autopatch a fixture of the original project on one in the target list with the same addresses