I've been trying to figure out how to use the Audio Trigger Factory, but can't seem to get it to work. As soon as I check the "Enable" box, one of the cores of my CPU goes to 100%, attributed to "qlcplus --open". Beyond that, nothing happens. All the collumns in the audio trigger section are empty black spots, and nothing shows up in the volume section. I set things to happen at different levels, but nothing ever did.
During my tests, I was playing music in to the computer via the mic-in jack. I can hear the music through the computer speakers, and if I open up Audacity, I can see and record the music, so the hardware seems to be working fine. In Audacity I have the option to select the input audio device - a setting that I cannot seem to find in QLC+ anywhere! However, Audacity also got it right by default, and almost all the choices still worked.
Further troubleshooting the issue, I created a brand new project with no fixtures, no scenes, or anything. I started the music playing, opened the audio trigger factory, and pressed Enable. When I did, I finally saw the yellow and green bars in the section, but they are frozen in place, not moving with the music as I would have expected. If I go into the settings, or close the trigger factory and re-open it, the bars are all gone and it's back to just black.
Here are the details about my configuration...
Computer: Lenovo Z61m laptop, Model 9450-A36
OS: Linux, Ubuntu 12.04.3 LTS (precise), 32 Bit
Kernel Info: Linux DMX-Master 3.2.0-52-generic-pae #78-Ubuntu SMP Fri Jul 26 16:43:19 UTC 2013 i686 i686 i386 GNU/Linux
QLC+ Version: 4.4.1, installed from .deb file on your site.
Hardware:
*-multimedia
description: Audio device
product: NM10/ICH7 Family High Definition Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 02
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:44 memory:ee240000-ee243fff
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Lenovo ThinkPad T60/R60 series [17aa:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
ALSA Info:
!!ALSA Version
!!------------
Driver version: 1.0.24
Library version: 1.0.25
Utilities version: 1.0.25
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
thinkpad_acpi
!!Sound Servers on this system
!!----------------------------
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xee240000 irq 44
29 [ThinkPadEC ]: ThinkPad EC - ThinkPad Console Audio Control
ThinkPad Console Audio Control at EC reg 0x30, fw 7FHT26WW-1.08
!!Modprobe options (Sound related)
!!--------------------------------
snd-atiixp-modem: index=-2
snd-intel8x0m: index=-2
snd-via82xx-modem: index=-2
snd-usb-audio: index=-2
snd-usb-caiaq: index=-2
snd-usb-ua101: index=-2
snd-usb-us122l: index=-2
snd-usb-usx2y: index=-2
snd-cmipci: mpu_port=0x330 fm_port=0x388
snd-pcsp: index=-2
snd-usb-audio: index=-2
!!Loaded sound module options
!!---------------------------
!!Module: snd_hda_intel
-ne
align_buffer_size : Y
-ne
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
-ne
beep_mode : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-ne
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
-ne
enable_msi : -1
-ne
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
-ne
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
-ne
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
-ne
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
-ne
position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-ne
power_save : 0
-ne
power_save_controller : Y
-ne
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
-ne
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-ne
single_cmd : N
-ne
snoop : Y
!!Module: thinkpad_acpi
-ne
brightness_enable : 2
-ne
brightness_mode : 4
-ne
dbg_bluetoothemul : 0
-ne
dbg_uwbemul : 0
-ne
dbg_wlswemul : 0
-ne
dbg_wwanemul : 0
-ne
enable : Y
-ne
experimental : 0
-ne
fan_control : N
-ne
force_load : N
-ne
hotkey_report_mode : 0
-ne
id : ThinkPadEC
-ne
index : -536870912
-ne
volume_capabilities : 0
-ne
volume_control : N
-ne
volume_mode : 3
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Analog Devices AD1981
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x11d41981
Subsystem Id: 0x17aa2060
Revision Id: 0x100200
No Modem Function Group found
Default PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=1, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=1, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=1, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=1, unsol=0
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Control: name="IEC958 Playback Source", index=0, device=0
Device: name="AD198x Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
PCM:
rates [0x60]: 44100 48000
bits [0x2]: 16
formats [0x5]: PCM AC3
Delay: 3 samples
Connection: 2
0x01 0x04*
Node 0x03 [Audio Output] wcaps 0x441: Stereo
Device: name="AD198x Analog", type="Audio", device=0
Converter: stream=0, channel=0
Power states: D0 D3
Power: setting=D0, actual=D0
Processing caps: benign=1, ncoeff=70
Node 0x04 [Audio Input] wcaps 0x100511: Stereo
Device: name="AD198x Analog", type="Audio", device=0
Converter: stream=4, channel=0
SDI-Select: 0
PCM:
rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000
bits [0x6]: 16 20
formats [0x1]: PCM
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 1
0x15
Node 0x05 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Control: name="Master Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Master Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x3d 0x3d]
Pincap 0x0001173f: IN OUT HP EAPD Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
EAPD 0x0:
Pin Default 0xc3014110: [Both] Line Out at Ext Left
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 2
0x03 0x0e*
Node 0x06 [Pin Complex] wcaps 0x400185: Stereo Amp-Out
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000001f: OUT HP Detect Trigger ImpSense
Pin Default 0x422140f0: [N/A] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Connection: 2
0x03 0x0e*
Node 0x07 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x591311f0: [N/A] Speaker at Int ATAPI
Conn = ATAPI, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x0f
Node 0x08 [Pin Complex] wcaps 0x400083: Stereo Amp-In
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00001727: IN Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0xc2a1502e: [Both] Mic at Ext Front
Conn = 1/8, Color = Red
DefAssociation = 0x2, Sequence = 0xe
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Node 0x09 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0xbf 0xbf]
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x418130f0: [N/A] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 2
0x03* 0x0e
Node 0x0a [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x014411f0: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
Connection: 6
0x03 0x0c 0x09 0x0e* 0x05 0x18
Node 0x0c [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1e 0x1f
Node 0x0d [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: [0x04]
Connection: 2
0x10* 0x16
Node 0x0e [Audio Mixer] wcaps 0x200101: Stereo
Connection: 8
0x0d 0x11 0x12 0x13 0x1a 0x1b 0x1c 0x1d
Node 0x0f [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x0b
Node 0x10 [Beep Generator Widget] wcaps 0x700000: Mono
Node 0x11 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="PCM Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="PCM Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x1f 0x1f]
Connection: 1
0x03
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x1f 0x1f]
Connection: 1
0x08
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x09
Node 0x14 [Power Widget] wcaps 0x500500: Mono
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 13
0x0d 0x0e 0x0f 0x10 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1d
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Capture Source", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x0c 0x0c]
Connection: 8
0x0c* 0x09 0x0e 0x0f 0x19 0x05 0x18 0x17
Node 0x16 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x59f311f0: [N/A] Other at Int ATAPI
Conn = ATAPI, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x17 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x00000027: IN Detect Trigger ImpSense
Pin Default 0x599311f0: [N/A] Aux at Int ATAPI
Conn = ATAPI, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Node 0x18 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
Amp-Out vals: [0xbf 0xbf]
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x41a190f0: [N/A] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 2
0x03* 0x0e
Node 0x19 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x9933e120: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = White
DefAssociation = 0x2, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x05
Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x17
Node 0x1c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x18
Node 0x1d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="CD Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="CD Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x1f 0x1f]
Connection: 1
0x19
Node 0x1e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 1
0x08
Node 0x1f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x18
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw---T+ 1 root audio 116, 7 Sep 5 21:40 /dev/snd/controlC0
crw-rw---T+ 1 root audio 116, 2 Sep 5 21:40 /dev/snd/controlC29
crw-rw---T+ 1 root audio 116, 6 Sep 5 21:40 /dev/snd/hwC0D0
crw-rw---T+ 1 root audio 116, 5 Sep 14 15:20 /dev/snd/pcmC0D0c
crw-rw---T+ 1 root audio 116, 4 Sep 14 15:22 /dev/snd/pcmC0D0p
crw-rw---T+ 1 root audio 116, 3 Sep 5 21:40 /dev/snd/pcmC0D1p
crw-rw---T 1 root audio 116, 1 Sep 5 21:40 /dev/snd/seq
crw-rw---T+ 1 root audio 116, 33 Sep 5 21:40 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Sep 5 21:40 .
drwxr-xr-x 3 root root 220 Sep 5 21:40 ..
lrwxrwxrwx 1 root root 12 Sep 5 21:40 pci-0000:00:1b.0 -> ../controlC0
lrwxrwxrwx 1 root root 13 Sep 5 21:40 platform-thinkpad_acpi -> ../controlC29
!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xee240000 irq 44'
Mixer name : 'Analog Devices AD1981'
Components : 'HDA:11d41981,17aa2060,00100200'
Controls : 21
Simple ctrls : 12
Simple mixer control 'Master',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Mono:
Front Left: Playback 61 [97%] [0.00dB] [on]
Front Right: Playback 61 [97%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [on]
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Playback Source',0
Capabilities: enum
Items: 'PCM' 'ADC'
Item0: 'ADC'
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 4 [27%] [-33.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 12 [80%] [18.00dB] [on]
Front Right: Capture 12 [80%] [18.00dB] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 64 [53%] [2.00dB]
Front Right: Capture 64 [53%] [2.00dB]
!!-------Mixer controls for card 29 [ThinkPadEC]
Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 7FHT26WW-1.08'
Mixer name : 'ThinkPad EC 7FHT26WW-1.08'
Components : ''
Controls : 2
Simple ctrls : 1
Simple mixer control 'Console',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 14
Mono: Playback 6 [43%] [on]
!!Alsactl output
!!--------------
--startcollapse--
state.Intel {
control.1 {
iface MIXER
name 'Master Playback Volume'
value.0 61
value.1 61
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -9150
dbmax 300
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Master Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'PCM Playback Volume'
value.0 31
value.1 31
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 1200
dbvalue.1 1200
}
}
control.4 {
iface MIXER
name 'PCM Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Mic Playback Volume'
value.0 31
value.1 31
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 1200
dbvalue.1 1200
}
}
control.6 {
iface MIXER
name 'Mic Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.7 {
iface MIXER
name 'CD Playback Volume'
value.0 31
value.1 31
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 1200
dbvalue.1 1200
}
}
control.8 {
iface MIXER
name 'CD Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.9 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.10 {
iface MIXER
name 'Capture Volume'
value.0 12
value.1 12
comment {
access 'read write'
type INTEGER
count 2
range '0 - 15'
dbmin 0
dbmax 2250
dbvalue.0 1800
dbvalue.1 1800
}
}
control.11 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.12 {
iface MIXER
name 'Capture Source'
value Mic
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Mic
item.1 Mix
item.2 CD
}
}
control.13 {
iface MIXER
name 'IEC958 Playback Source'
value ADC
comment {
access 'read write'
type ENUMERATED
count 1
item.0 PCM
item.1 ADC
}
}
control.14 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.15 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.16 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.17 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.18 {
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.19 {
iface MIXER
name 'Beep Playback Volume'
value 4
comment {
access 'read write'
type INTEGER
count 1
range '0 - 15'
dbmin -4500
dbmax 0
dbvalue.0 -3300
}
}
control.20 {
iface MIXER
name 'Beep Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.21 {
iface MIXER
name 'Digital Capture Volume'
value.0 64
value.1 64
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 200
dbvalue.1 200
}
}
}
state.ThinkPadEC {
control.1 {
iface MIXER
name 'Console Playback Volume'
value 6
comment {
access read
type INTEGER
count 1
range '0 - 14'
}
}
control.2 {
iface MIXER
name 'Console Playback Switch'
value true
comment {
access read
type BOOLEAN
count 1
}
}
}
--endcollapse--
!!All Loaded Modules
!!------------------
Module
ftdi_sio
usbserial
joydev
pcmcia
psmouse
arc4
snd_hda_codec_analog
i915
tifm_7xx1
tifm_core
iwl3945
iwl_legacy
serio_raw
mac80211
snd_hda_intel
snd_hda_codec
cfg80211
yenta_socket
pcmcia_rsrc
drm_kms_helper
pcmcia_core
nsc_ircc
drm
thinkpad_acpi
snd_hwdep
snd_pcm
irda
snd_timer
snd_page_alloc
i2c_algo_bit
video
snd
mac_hid
soundcore
nvram
tpm_tis
crc_ccitt
lp
parport
firewire_ohci
firewire_core
sdhci_pci
sdhci
crc_itu_t
tg3
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:
0x05 0xc3014110
0x06 0x422140f0
0x07 0x591311f0
0x08 0xc2a1502e
0x09 0x418130f0
0x0a 0x014411f0
0x16 0x59f311f0
0x17 0x599311f0
0x18 0x41a190f0
0x19 0x9933e120
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
!!ALSA/HDA dmesg
!!--------------
[ 8.135037] cfg80211: Calling CRDA to update world regulatory domain
[ 8.227672] snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.227679] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[ 8.227753] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 8.227790] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8.332903] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf0, PCI irq 16
--
[753481.544119] CE: hpet increased min_delta_ns to 20113 nsec
[754606.480142] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Audio Trigger Factory: 100% CPU, Doesn't Work
A few more pieces of info I just found.
First - a correction - I previously stated that the bars that appeared but froze when I enabled the factory went black after closing and re-opening the section. That was incorrect - the bars remain when you re-open it, still frozen in their original position. They only go away if you go into the setup for the triggers, or if you disable and re-enable it. If you disable/re-enable, it never shows bars again. It's only the first time after opening the program.
Also - I'm now able to view those initial frozen bars even on my project with fixtures and scenes. This is new today - yesterday it was only the empty project - but it still doesn't seem to work in any way and the CPU is still at 100%.
I tried running qlcplus via a console to look for any errors being logged to console. Every time I start the program, it says:
"Unable to load library icui18n "Cannot load library icui18n: (libicui18n.so.48: cannot open shared object file: No such file or directory)"
Q Light Controller Plus version 4.4.1"
When I first ran it, it also said:
"ALSA lib seq_hw.c:457:(snd_seq_hw_open) open /dev/snd/seq failed: Permission denied"
I thought this was likely related to the issue. Given the permission issue, I tried running qlcplus as root, to see if things worked. The error went away, but the problem didn't change at all - still 100% CPU, still no functionality.
I then exited, and tried running as a regular user again. The error did not reappear on the console. The problem still exists. Maybe it wasn't related after all.
First - a correction - I previously stated that the bars that appeared but froze when I enabled the factory went black after closing and re-opening the section. That was incorrect - the bars remain when you re-open it, still frozen in their original position. They only go away if you go into the setup for the triggers, or if you disable and re-enable it. If you disable/re-enable, it never shows bars again. It's only the first time after opening the program.
Also - I'm now able to view those initial frozen bars even on my project with fixtures and scenes. This is new today - yesterday it was only the empty project - but it still doesn't seem to work in any way and the CPU is still at 100%.
I tried running qlcplus via a console to look for any errors being logged to console. Every time I start the program, it says:
"Unable to load library icui18n "Cannot load library icui18n: (libicui18n.so.48: cannot open shared object file: No such file or directory)"
Q Light Controller Plus version 4.4.1"
When I first ran it, it also said:
"ALSA lib seq_hw.c:457:(snd_seq_hw_open) open /dev/snd/seq failed: Permission denied"
I thought this was likely related to the issue. Given the permission issue, I tried running qlcplus as root, to see if things worked. The error went away, but the problem didn't change at all - still 100% CPU, still no functionality.
I then exited, and tried running as a regular user again. The error did not reappear on the console. The problem still exists. Maybe it wasn't related after all.