(Bug) XY-pad change last channel of a fixture

Cingulingu · Sun Jan 05, 2014 5:27 pm

HI,
I noticed that, when I add more then 1 fixture and I use an XY-pad to control them. The last channel on a fixtures begins to change, when I change the Y axes on the pad. So I have firstly redone the fixture but to no a vale.Then I start to experiment with different fixtures and I noticed that the last channel change only when the fixture added has less then 10 channel and I didn't use gap channel between them. Observations on 4.6.0 and 4.6.1 (git), x64, linux and win 7.
Thanks.

Jano Svitok · Sun Jan 05, 2014 5:40 pm

Good catch!

THe problem is here: https://github.com/mcallegari/qlcplus/b ... e.cpp#L376

I'll fix it.

Cingulingu · Sun Jan 05, 2014 5:49 pm

Thanks.
I forgot to tell, that the fixtures that causes the problem has only the msb pan/tilt channels (8bit)

Jano Svitok · Sun Jan 05, 2014 6:11 pm

Fixed, pushed to git.

Thanks for finding it.

Cingulingu · Sun Jan 05, 2014 6:58 pm

Thanks a lot. Compiled tested and WORKING!
Thanks again.

Joe · Sun Jan 05, 2014 9:37 pm

Wow! not just me. I thought it was just a fault in the DMX line.

Cingulingu · Mon Jan 06, 2014 9:56 am

For those of you who are on 4.6.0 and are waiting for the new release, the quick fix is to put a gap of 1 between fixtures.

Have a nice day