Hi
I use QLC +4.2.2 on mac mini OSX 10.8 and OSX 10.6 on a powerbook with an output interface USB-DMX IPTF (DMXLIGHT2 http://www.reve-production.com/achat/pr ... ils.php?id = 11) and a control surface ICON twelve o'clock (I-controls)
The midi input works perfectly.
Output side is my QLC + interface declares correct, but no lights!
Whatever the machine I use.
FYI: If I switch on the light standard edition QLC illuminate correctly.
phyl
QLC+ and FTDI USB-DMX /OSX 10.8 mac mini/ OSX 10.6 powerbook white
-
Massimo Callegari
Weird, I've got a FTDI USB dongle too and it works on Lion and Mountain Lion.
So, for my understanding:
- QLC+ detects your FTDI dongle
- Did you activate it by enabling its output checkbox ?
- QLC+ says it is open and working good ?
- do you see a blinking led on your device ?
- can you see the dongle serial number in the input/output panel ?
And at last, how did you check if the output is working ? (simple desk, scene, chaser ?)
So, for my understanding:
- QLC+ detects your FTDI dongle
- Did you activate it by enabling its output checkbox ?
- QLC+ says it is open and working good ?
- do you see a blinking led on your device ?
- can you see the dongle serial number in the input/output panel ?
And at last, how did you check if the output is working ? (simple desk, scene, chaser ?)
-
Heiko Fanieng
How can i discover, if my USB is a FTDI dongle?
I got two here, maybe on of them works with QLC+:
http://www.monacor.de/en/products/light ... rpubID=568
Compact DMX controller,
with SMD microprocessor for standard DMX applications on a PC.
http://www.onlineshop.dmx4all.de/media/ ... ROFI_g.pdf
Sorry, the manual for the 2nd is only available in german. For the 1st i'll check it with try and error, maybe QLC+ detect it
I got two here, maybe on of them works with QLC+:
http://www.monacor.de/en/products/light ... rpubID=568
Compact DMX controller,
with SMD microprocessor for standard DMX applications on a PC.
http://www.onlineshop.dmx4all.de/media/ ... ROFI_g.pdf
Sorry, the manual for the 2nd is only available in german. For the 1st i'll check it with try and error, maybe QLC+ detect it
-
Massimo Callegari
Well, the first one seems to be based on a SMD chipset, which is not supported.
I don't even know if it is a USB-to-serial interface.
The second one seems to be based on DMX4All. I think Heikki started to look at it but went nowhere.
https://sourceforge.net/mailarchive/mes ... id=1292803
That one is USB-serial and shouldn't be too difficult to support (I think OLA supports it) but it's very hard (and slow) for me to add the support for a device if I don't phisically own it.
Maybe you can send it to me and then I'll send it back ?
I don't even know if it is a USB-to-serial interface.
The second one seems to be based on DMX4All. I think Heikki started to look at it but went nowhere.
https://sourceforge.net/mailarchive/mes ... id=1292803
That one is USB-serial and shouldn't be too difficult to support (I think OLA supports it) but it's very hard (and slow) for me to add the support for a device if I don't phisically own it.
Maybe you can send it to me and then I'll send it back ?
-
Massimo Callegari
I just checked the Stageprofi Mk2 dongle and it is based on an FTDI chip !
I recalled that if your dongle doesn't have "FTDI" as vendor name, by default it is recognized as an Enttec USB PRO.
You both should try this: open the configuration panel and force it to "Open TX"
Click OK and cross your fingers
I recalled that if your dongle doesn't have "FTDI" as vendor name, by default it is recognized as an Enttec USB PRO.
You both should try this: open the configuration panel and force it to "Open TX"
Click OK and cross your fingers
-
Heiko Fanieng
Massimo,
no problem - i don't use it at the moment, i got also the DMX-1USB if I need to run Windows-Software.
So please E-Mail me your postal adress, an i'll send the DMX4ALL to you. Maybe yo have more success than Heikki.
Would be great to have a bigger user-base for QLC+
Heiko
no problem - i don't use it at the moment, i got also the DMX-1USB if I need to run Windows-Software.
So please E-Mail me your postal adress, an i'll send the DMX4ALL to you. Maybe yo have more success than Heikki.
Would be great to have a bigger user-base for QLC+
Heiko
-
patrick
Hi Massimo
In response to your question:
- QLC+ detects your FTDI dongle
The dongle appears in the I / O panel, and disappears when I unplugged
- QLC+ says it is open and working good ?
QLC+ says "the peripheral works properly"
- Did you activate it by enabling its output checkbox ?
of course
- do you see a blinking led on your device ?
My dongle has no LED control.
But no LED is flashing on my DMX dimmers which shows that the communication is not established. By cons, if I leave QLC + without changing the wiring and I run QLC, DMX LED flashes on the network and DMX dimmers are active. we can be like a track, QLC and QLC + are built on the same core?
- can you see the dongle serial number in the input/output panel ?
I do not think, sometimes appear behind the letter S / N: yy gender, but I do not think this is a serial number
-And at last, how did you check if the output is working ? (simple desk, scene, chaser ?)
I did many tests, simple desk, scene, chaser … but as long as there is no DMX communication is doomed to failure.
I asked the manufacturer kindly indicate the version of the chipset dongle his team, I communiquerais of the information that I have received
In response to your question:
- QLC+ detects your FTDI dongle
The dongle appears in the I / O panel, and disappears when I unplugged
- QLC+ says it is open and working good ?
QLC+ says "the peripheral works properly"
- Did you activate it by enabling its output checkbox ?
of course
- do you see a blinking led on your device ?
My dongle has no LED control.
But no LED is flashing on my DMX dimmers which shows that the communication is not established. By cons, if I leave QLC + without changing the wiring and I run QLC, DMX LED flashes on the network and DMX dimmers are active. we can be like a track, QLC and QLC + are built on the same core?
- can you see the dongle serial number in the input/output panel ?
I do not think, sometimes appear behind the letter S / N: yy gender, but I do not think this is a serial number
-And at last, how did you check if the output is working ? (simple desk, scene, chaser ?)
I did many tests, simple desk, scene, chaser … but as long as there is no DMX communication is doomed to failure.
I asked the manufacturer kindly indicate the version of the chipset dongle his team, I communiquerais of the information that I have received
-
Massimo Callegari
Yes, QLC and QLC+ work on the same USB/FTDI library.
Can you please try to force your dongle as OpenTX as mentioned below ?
thanks
Can you please try to force your dongle as OpenTX as mentioned below ?
thanks
-
patrick
Here the choice of Panel I / O
ArtNet: In Out
DMX USB Out
ENTTEC wing: none
Manager IAC Midi In Out
Midi Control Icon In Out
OSC OSC network 1 - 2 - 3-4 In
peperoni none
uDMX none
I do not see how to force the dongle?
Here is the response from the dongle manufacturer:
"We use the same chips as the Open DMX interface Enttec
QLC being compatible with the Open DMX interface, no problem with our
not ... "
Patrick
ArtNet: In Out
DMX USB Out
ENTTEC wing: none
Manager IAC Midi In Out
Midi Control Icon In Out
OSC OSC network 1 - 2 - 3-4 In
peperoni none
uDMX none
I do not see how to force the dongle?
Here is the response from the dongle manufacturer:
"We use the same chips as the Open DMX interface Enttec
QLC being compatible with the Open DMX interface, no problem with our
not ... "
Patrick
-
patrick
I just found the control panel!
I had the choice between TX Pro, Open Pro Tx and Rx.
He was well on OpenTx I refreshed on Open Tx, but there has always not communication with the DMX network.
I had the choice between TX Pro, Open Pro Tx and Rx.
He was well on OpenTx I refreshed on Open Tx, but there has always not communication with the DMX network.
-
Heiko Fanieng
Some Information on testing with DMX4ALL USB-DMX-Stageprofi MK2 under Windows 7 64bit
-QLC+ 4.22 don't start, if the interface is connected
-After removing it, QLC+ starts immediately
-It's detected as USB-DMX-Interface (S/N:DEQWJ28)
-After forcing it to Open TX QLC+ crashed
OS X 10.8.2
-QLC+ 4.22 starts with connected Stageprofi MK2
-Under input/output Plugin shows "DMX USB", Device "None"
-Clicking on configure shows nothing, even after update
Conclusion for today, 2 OS-Systems, 2 behaviours of Stageprofi MK2
-QLC+ 4.22 don't start, if the interface is connected
-After removing it, QLC+ starts immediately
-It's detected as USB-DMX-Interface (S/N:DEQWJ28)
-After forcing it to Open TX QLC+ crashed
OS X 10.8.2
-QLC+ 4.22 starts with connected Stageprofi MK2
-Under input/output Plugin shows "DMX USB", Device "None"
-Clicking on configure shows nothing, even after update
Conclusion for today, 2 OS-Systems, 2 behaviours of Stageprofi MK2
-
Massimo Callegari
Not a conforting report at all 
On Windows I suggest to uninstall and reinstall QLC+ when changing version.
The fact that it shows the device and its serial number is a good sign, but I don't understand why then it crashes.
Can you please try the MK2 with QLC 3.2.2 either on Windows and OSX ?
Also, is there a way to delete preferences of an application on OSX ? I know nothing about that troublesome OS..
Thanks for you patience
On Windows I suggest to uninstall and reinstall QLC+ when changing version.
The fact that it shows the device and its serial number is a good sign, but I don't understand why then it crashes.
Can you please try the MK2 with QLC 3.2.2 either on Windows and OSX ?
Also, is there a way to delete preferences of an application on OSX ? I know nothing about that troublesome OS..
Thanks for you patience
-
patrick
heiko
Could you test DMX4ALL USB-DMX-MK2 Stageprofi under OSX with QLC standard edition.
From my side the FTDI dongle does not run with QLC+ but works perfectly with QLC.
If your test was confirmed things that could open up new avenues.
Patrick
Could you test DMX4ALL USB-DMX-MK2 Stageprofi under OSX with QLC standard edition.
From my side the FTDI dongle does not run with QLC+ but works perfectly with QLC.
If your test was confirmed things that could open up new avenues.
Patrick
-
Heiko Fanieng
On Windows i did a clean install. After deinstallation and bevor new installation i use also http://www.piriform.com/ccleaner for kiling old registry entries.
Under OS X the Preference and Fixtures for QLC+ are in the library:
~/Library/Application Support/QLC+ -> Hit [alt] and then click on "go to" in the Finder Menu. Library is hidden per default.
App Cleaner was a good way for me to find out where OS X Apps saves ther preferences:)
Hope to find time this weekend to check the MK2 with QLC under Windows and OS X.
Under OS X the Preference and Fixtures for QLC+ are in the library:
~/Library/Application Support/QLC+ -> Hit [alt] and then click on "go to" in the Finder Menu. Library is hidden per default.
App Cleaner was a good way for me to find out where OS X Apps saves ther preferences:)
Hope to find time this weekend to check the MK2 with QLC under Windows and OS X.
-
patrick
Heiko bad news.
From my side I reinstalled a brand new OSX 10.6 to try QLC+, but it does not work better.
if summarized
German MK2 does not work with QLC or with QLC +
The French "reve production" dongle works with QLC but not with QLC +
Massimo talk about a dongle that works with QLC + Can you give me references, it is not too expensive I'll order. Then I could send you mine if it can help you.
From my side I reinstalled a brand new OSX 10.6 to try QLC+, but it does not work better.
if summarized
German MK2 does not work with QLC or with QLC +
The French "reve production" dongle works with QLC but not with QLC +
Massimo talk about a dongle that works with QLC + Can you give me references, it is not too expensive I'll order. Then I could send you mine if it can help you.
-
Massimo Callegari
@patrick
I can't find the dongle I'm using at the moment, but there are a few Enttec-compatible adapters around the internet, for half the price of the original. Here's one I tried:
http://www.ebay.com/itm/INTERFACE-USB-D ... 245wt_1141
or you can go with a DMXKing one:
http://dmxking.com/usbdmx/ultradmxmicro
By the way I'm 99% sure that if something works with QLC, it has to work with QLC+ too ! I checked the code and I don't see a reason why it shouldn't
The last thing you could try is on a non-OSX machine (Windows or Linux)
I can't find the dongle I'm using at the moment, but there are a few Enttec-compatible adapters around the internet, for half the price of the original. Here's one I tried:
http://www.ebay.com/itm/INTERFACE-USB-D ... 245wt_1141
or you can go with a DMXKing one:
http://dmxking.com/usbdmx/ultradmxmicro
By the way I'm 99% sure that if something works with QLC, it has to work with QLC+ too ! I checked the code and I don't see a reason why it shouldn't
The last thing you could try is on a non-OSX machine (Windows or Linux)
-
patrick
I just order new zealand, they guarantee the dongle is compatible QLC + mac os.
I'll let you know after reception tests.
cordially
patrick
I'll let you know after reception tests.
cordially
patrick
-
patrick
hello
Here are the results of my tests with the dongle DMXking
http://www.dmxking.com/usbdmx/ultradmxmicro
Everything works perfectly with QLC +4.2.2, QLC, DLight under OSX 10.6 installed on USB key without adding drivers.
it seems that the choice of dongle is important.
By QLC against +4.2.2 not running OS 10.5.8 updated to 10.6. I installed the drivers manually installing D2XX QLC.
it seems that the old drivers interfere QLC +.
I return to my system properly installed 10.6 on a USB key to try QLC +4.3.
The dongle now appears with a S / N does not correspond to its real serial number (when I try to enter Setup + QLC freezes).
I raise QLC +4.3. the light does not illuminate, the interfaces do not blink, there is no transmission on the DMX network. I made several attempts to do anything !!!
Here are the results of my tests with the dongle DMXking
http://www.dmxking.com/usbdmx/ultradmxmicro
Everything works perfectly with QLC +4.2.2, QLC, DLight under OSX 10.6 installed on USB key without adding drivers.
it seems that the choice of dongle is important.
By QLC against +4.2.2 not running OS 10.5.8 updated to 10.6. I installed the drivers manually installing D2XX QLC.
it seems that the old drivers interfere QLC +.
I return to my system properly installed 10.6 on a USB key to try QLC +4.3.
The dongle now appears with a S / N does not correspond to its real serial number (when I try to enter Setup + QLC freezes).
I raise QLC +4.3. the light does not illuminate, the interfaces do not blink, there is no transmission on the DMX network. I made several attempts to do anything !!!
-
Massimo Callegari
Hello Patrick,
I'm not sure I understand all the tests you've done, but I think you don't need extra drivers to make a FTDI dongle working with QLC+.
As far as I know, FTDI and D2XX conflicts.
So you're telling me that on the same machine 4.2.2 works and 4.3.0 doesn't ?
I'm not sure I understand all the tests you've done, but I think you don't need extra drivers to make a FTDI dongle working with QLC+.
As far as I know, FTDI and D2XX conflicts.
So you're telling me that on the same machine 4.2.2 works and 4.3.0 doesn't ?