Simple deck midi channel

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
de DJ Fabriek

it may be that the channels of simple deck respond to a MIDI signal?
Top
de DJ Fabriek

I have a Elation Midicon an if i press one of the buttons 1 to 32. The faders on simple deck goes full on. Button one have a midi channel of 182, fader 182 in simple desk goes full on. Button 2 have a midi channel of 183, fader 183 goes full on.. and so on.
Top
de DJ Fabriek

Today i have searching for The problem and i cant find iT.
Top
Massimo Callegari

You can control Simple DESK channels with channel groups.
http://www.qlcplus.org/docs/channelsgroupeditor.html

There is no way to do a 1-to-1 assignment of channels from an external controller
Top
de DJ Fabriek

Hi Massimo,

The problem is not that i want to use simple desk with my Midiocon. The problem is that my Midicon now activate faders (full on) on simple desk. I want to deactivate that.
Top
Massimo Callegari

Then I don't understand the problem.
Simple Desk is normally just a monitor. If you don't touch it manually, it just displays the current values of the DMX channels.
Top
de DJ Fabriek

I go to find out what the problem is.. i let you know if i find out.
Top
de DJ Fabriek

I don't no whats wrong.

When i checked the input for midicon without checked the Enttecusb open there is no problem. When i checked both there is a problem.
Top
Jano Svitok

The problem is that your MIDIcon input is mapped to your DMX universe.
The input (=MIDIcon) and DMX (=open DMX) universes must be different.

For e.g. universe 1, map output to your DMX device
For e.g. universe 2, map input and feedback to MIDIcon device.

Otherwise MIDIcon data will show up on your DMX output, and that's also what Simple Desk is showing.
Top
de DJ Fabriek

Thank you very much!!
Top
Post Reply

Return to “Archive - no new threads please”