Speed Dial not working below .10 (v4.8.3)

Jimmy T. · Thu Jan 08, 2015 2:44 am

Hi All,

I have noticed on OSX version that the speed dials will not work below the .10 mark. I have found that if I manually enter a number of .06 it will run as if I adjusted it to .06. BUT, if I press enter it will go to .6 which is a timer of .60.

Thanks
Jimmy

Jano Svitok · Thu Jan 08, 2015 9:56 am

See https://sourceforge.net/p/qlcplus/discu ... /18d0d268/
The value is OK (0.06) but the display is wrong.