Hi, recently I've run across a problem with programming my moving heads and when I save and open the file back up, the values are gone JUST for these lights. I think I might have made a bad profile??
I'm using blizzard lighting's Bladerunner RGBW. Any thoughts or insight is greatly appreciated.
Thanks so much,
Suzzie
Workspace not saving moving head fixture dmx values.
-
Jano Svitok
Suzzie,
please post: your QLC+ version, operating system, and a step-by-step process to reproduce the problem.
please post: your QLC+ version, operating system, and a step-by-step process to reproduce the problem.
-
Suzzandra GoForth
UPDATE: I deleted the fixtures, and added the fixtures again and it seems to be working now, but I'll describe what was happening anyways.
QLC+ 4.8.2, Mac OSX Yosemite,
Theoretical situation: I open QLC+, add 2 Bladerunner RGBW lights, create a scene for both of them, play with the channels to set values into the dmx, the lights respond. Next I saved the workspace and closed QLC+. I reopened the workspace, and my channels were all set back to 0.
I had multiple lights last night and it seemed that only the bladerunners were causing me trouble in the program. Might have been a quirk.
Thank you.
QLC+ 4.8.2, Mac OSX Yosemite,
Theoretical situation: I open QLC+, add 2 Bladerunner RGBW lights, create a scene for both of them, play with the channels to set values into the dmx, the lights respond. Next I saved the workspace and closed QLC+. I reopened the workspace, and my channels were all set back to 0.
I had multiple lights last night and it seemed that only the bladerunners were causing me trouble in the program. Might have been a quirk.
Thank you.