I modified my project multiple time and at the end the Monitor chashes (2DView was last activated).
It is no more possible to activate the Monitor.
Allmost all fixtures are defined is Universe 2 and only 1 fixture is defined in Universe 1
Can I send you some materials to help resolution ?
No interface is connected.
Regards
Alain
Monitor Crashes under WIN7 32bit with QLC+ 4.7.2
Using another project, the Monitor displays in 2DView without problem.
It seems to be linked to project's content: fixture ? numbers ? other ?
Alain
It seems to be linked to project's content: fixture ? numbers ? other ?
Alain
Here is the Project
Thank you
Alain
Thank you
Alain
- Attachments
-
- TetaTrac_LeCoupable_View2D.qxw
- (3.9 KiB) Downloaded 41 times
Ok, the crash is confirmed, found and I just fixed it.
What happened here is that after you created the 2D view, you removed a bunch of fixtures from the project.
Now to recover your project you need to manually remove from the section all the fixtures that you have deleted (check the IDs)
Try the attached.
What happened here is that after you created the 2D view, you removed a bunch of fixtures from the project.
Now to recover your project you need to manually remove from the section all the fixtures that you have deleted (check the IDs)
Try the attached.
- Attachments
-
- TetaTrac_LeCoupable_View2D_fixed.qxw
- (7.3 KiB) Downloaded 39 times
Thank you Massimo,
I test it in few minutes a,d will update you.
I removed some fixtures and add others many times.
if it can help.
Regards
Alain
I test it in few minutes a,d will update you.
I removed some fixtures and add others many times.
if it can help.
Regards
Alain
I verified. SUCCESSFULLLY !
I understand how to workaround if it occurs again.
Thank YOU
Alain
I understand how to workaround if it occurs again.
Thank YOU
Alain