Chaser Bug report

[Frank]

Hi, I'm using QLC+ for a small theatre, so chasers are what I mostly need (= scenes controlled by hand).

But I have found 2 bugs within the chasers:

I noticed 1 bug in the use of the speed dail: When I set a fade in/fade out (let say both 2 seconds)
and I set the Hold on Infinite (because I have to decide when the next scene comes up), the duration of the step is only 1.99s. This means, when I start the chaser, each scene lasts 2 seconds and goes automatic to the next scene.
To avoid this now, I'm setting the hold to 5 hours, so the duration becomes 5 hours en 2 seconds..

The second bug is that sometimes channels don't get the right value when I go (up and down) to quick through scenes in a chaser.

Only thing I still miss in the chasers is the ability to combine sound and light in 1 chaser.
But they need to be separately controllable. This means, starting a sound in step 1 (using a fade in if possible), next step 2 bringing up a scene, step 3 would be a silent soundfile which could fade out the sound playing.
If I do this now, the sounds gets stopped by entering step 2...

best regards and thanks for the effort!
Frank

[Frank]

I'm attaching a sample qxw file, to show the problems described.
If you go quickly through the steps in the chaser, you will notice that channel 45 and channel 46 sometimes don't get their value at scene DD03 (step 8)