Can the audio input widget be configured on the fly?
-
Jon Blackwell
In the first release that had the audio input feature, you could change the settings without going into design mode. With the widget, you have to go to design mode in order to make any changes, is there any way to maybe put a settings button on the widget so it can be changed on the fly?
-
Jano Svitok
Certainly it can.
The problem is that the original idea of QLC was that almost everything is locked down to prevent inexperienced operators to break the configuration. Obviously, that's what
you (or I, fwiw) want/need. But still there may be people that use this feature.
The way out here is to define some locked mode, where the user can make only minimal changes, and normal, where almost everything is possible... which might not be as easy as it sounds...
The problem is that the original idea of QLC was that almost everything is locked down to prevent inexperienced operators to break the configuration. Obviously, that's what
you (or I, fwiw) want/need. But still there may be people that use this feature.
The way out here is to define some locked mode, where the user can make only minimal changes, and normal, where almost everything is possible... which might not be as easy as it sounds...
-
Jon Blackwell
I'm just talking about adjusting the audio input widget while in operation mode, can that be done?
-
Joe
To be honest, I'd like to be able to lock/unlock all widgets. When I am setting the value ranges for EFX speed dials, It's very much trial and error, and this takes a lot of time when you have to constantly go in and out of design mode.