Hello everyone,
I have created a definition for Chauvet's Intimidator LED 150 and all functions work great. The problem comes when using an XY Pad or trying to set a scene. Whatever setting the Pan/Tilt is on in the Simple Desk overrides the settings in the VC or Scene.
For example: If the light is facing straight down and I use my XY Pad widget to turn the light, it immediately returns to the original position of straight down.
If I create a scene and input Pan/Tilt values - when I activate that scene the light does not even move. (DMX Monitor also shows no change on any channel other than the Dimmer)
Mac OSX Mavericks
Enttec Open DMX USB
QLC+ 4.5.1
Once again - all functions work beautifully in the Simple Desk.
Pan/Tilt only controllable through simple desk
-
Jano Svitok
https://sourceforge.net/p/qlcplus/discu ... da7a/#03c5
https://sourceforge.net/p/qlcplus/discu ... 9da9/#10ca
Summary: SimpleDesk for LTP channels is BROKEN in 4.5.0. The fix is waiting for the next release (you can try to compile yourself if you are brave and impatient enough).
https://sourceforge.net/p/qlcplus/discu ... 9da9/#10ca
Summary: SimpleDesk for LTP channels is BROKEN in 4.5.0. The fix is waiting for the next release (you can try to compile yourself if you are brave and impatient enough).