I keep crashing QLC+ with my audio trigger desires an I;m rather hoping i can find out where i am going wrong.
I was having toubles with qlc+ either closing completely (If i had my audio input selected on the 'audio' section of the 'input/output' tab.
OR it would just hang if i didn't have any audio input selected.
I decided to create a project from scratch using only 4 scenes and 4 collections in an 8 frequency bar audio widget... just in case i had made an error elsewhere.
i assigned a scene or a collection to each of the audio trigger frequencies.
in opperate mode i get the errors mentioned above.
my operating system is MINT 14 XCFE
My QLC+ is 4.5.1
my web explorer is firefox 25.0
I attached the project so you can better understand me.
Here are my questions...
1)where can i find and how can i send an error / log report?
3) is this a known issue or am i the first?
many thanks Preview
Cancel
Rick
audio trigger closes QLCplus instantly... or 'hangs' it.
-
RickBrock
Yes sir, indeed I did.
I only found somebody having the problem in windows. A post from you on that thread said I was fixed in 4.4.1
Also I found a discussion from somebody on Ubuntu with a 'strange' Linux kernel.
Unfortunately I didn't find anything I understood to help me. However, I shall search deeper.
Thanks
I only found somebody having the problem in windows. A post from you on that thread said I was fixed in 4.4.1
Also I found a discussion from somebody on Ubuntu with a 'strange' Linux kernel.
Unfortunately I didn't find anything I understood to help me. However, I shall search deeper.
Thanks
-
René
Hey,
I just tested your setup on 2 Ubuntu-systems
(12.04 64bit and 13.10 32bit)
it worked on both just fine.
Try to disable the audio-input on the "input/output" tab and test it again (if you enabled it)
Edit: sorry, you already mention the audio-input
regards
René
I just tested your setup on 2 Ubuntu-systems
(12.04 64bit and 13.10 32bit)
it worked on both just fine.
Try to disable the audio-input on the "input/output" tab and test it again (if you enabled it)
Edit: sorry, you already mention the audio-input
regards
René
-
RickBrock
Thanks René,
I recall reading someplace that the audio input was 'very broken'.
I will try another linux and report.
God bless
I recall reading someplace that the audio input was 'very broken'.
I will try another linux and report.
God bless
-
Anders Thomsen
Could this have to do with pulseaudio?
Try running with pulseaudio disabled, like so:
pasuspender qlcplus
Try running with pulseaudio disabled, like so:
pasuspender qlcplus
-
RickBrock
Hi everyone.
Today it worked!
As far as I know I didn't change anything in my audio setup.
I have nothing selected in the input/output tab.
The only thing I did different was...
1) only used 8 frequencies
2) set the trigger to a dmx channel and not a function. (The functions I tried to use last time were a mixture of 'collections' and 'scenes'
God bless.
Rick
Today it worked!
As far as I know I didn't change anything in my audio setup.
I have nothing selected in the input/output tab.
The only thing I did different was...
1) only used 8 frequencies
2) set the trigger to a dmx channel and not a function. (The functions I tried to use last time were a mixture of 'collections' and 'scenes'
God bless.
Rick