3 Chauvet Fixtures: COLORrail IRC, SLIMPar 38, and Shocker 90 IRC

TheSilentStill · Mon Feb 02, 2015 6:37 pm

Hey everyone!

I'm new to QLC+ and these are my first definitions. I watched the video on how to define them and tried to define them to the best of my abilities!

First I was wondering if they could be looked over to see if they are correct. Second, I was wondering how to define a channel when it has multiple parameters, for example: On the slim par 38 in 7 channel mode, channel 5 has multiple functions. When channel 6 is at 32-223, 0-225 is slow~fast, or when in RGB mode 16-225 is slow~fast. How should these be properly defined?

Please let me know if there are other corrections, and thank you SO SO much!!

TheSilentStill · Thu Feb 12, 2015 5:07 am

Heyo! Would anyone be able to take a look at this? Is there more specific questions I should be asking?

Thanks!

Massimo Callegari · Mon Mar 09, 2015 7:28 pm

It's just a matter of time before they gets reviewed.
Please be patient

007ghg7 · Tue Mar 10, 2015 5:08 am

I created a fixture for the slimpar 38 a few days ago if you want to see an example of how to do the multiple perimeter setup https://sourceforge.net/p/qlcplus/discu ... /948e8e9c/

Boxy · Tue Mar 10, 2015 8:47 am

Hi SilentStill.

First the Chauvet COLORRail (attached).

Everything's good apart from the 'click and go' colours were missing from channel 'Color Macro'. I've added them.

Regards,

Boxy

Boxy · Tue Mar 10, 2015 9:11 am

Some missing physical data. fixed.

Boxy · Tue Mar 10, 2015 9:29 am

And finally, there was missing physical info and I've modified some things a little bit. The datasheet doesn't match the fixture BTW.