Hello again,
my next fixture definition would be the 4-Channel version of the Eurolite LED Tube, but I don't know how to do this. As you can see in the [manual](http://media.steinigke.de/documents/00085738.pdf) on page 17, CH1 determines the function of the other channels.
CH1 on 0-13 means CH 2 is red, 3 green, and 4 blue.
CH1 on 42-55 plays internal program 3, CH 2 is Speed, CH 3 Strobe, and CH 4 Colour.
Thanks.
Thomas
Eurolite LED DMX Tube 1m RGB
-
Boxy
'Color sort (7 and 2 directions)'. I rest my case.
But seriously I would gladly complete these definitions if the manuals made any sense.
But seriously I would gladly complete these definitions if the manuals made any sense.
-
Thomas
It kind of makes some sense. iirc, this program divides the bar into seven color segments that move. Some move left, some right.
My problem completing the definition was that I did not know how to deal with a device, where the function of some channels depends on how other channels are set. Do you have a similar fixture definition as an example of how to implement that? Then I could try to do this.
If you want to, I can also make a video of the different operating modes.
My problem completing the definition was that I did not know how to deal with a device, where the function of some channels depends on how other channels are set. Do you have a similar fixture definition as an example of how to implement that? Then I could try to do this.
If you want to, I can also make a video of the different operating modes.
-
Boxy
Hi Thomas,
Attached is the best way I can see to do multi function channels. Channel 6 sets what channel 2 does.
Notes:
1. Channel 2 is of type 'effect' as it has multiple effects, not just red intensity. This stops the icon being red however.
2. The above allows the use of the correct colours to be shown on screen when in preset colour mode.
3. The channel's name field lists short form descriptions of all the functionality of that channel.
4. Channel 6 describes the fact that it's parameters are affected by channel 2.
That's as good as I can do.
P.S. I have no idea whether the attached definition is a released QLC+ fixture definition or not so do with it what you wish.
Boxy
Attached is the best way I can see to do multi function channels. Channel 6 sets what channel 2 does.
Notes:
1. Channel 2 is of type 'effect' as it has multiple effects, not just red intensity. This stops the icon being red however.
2. The above allows the use of the correct colours to be shown on screen when in preset colour mode.
3. The channel's name field lists short form descriptions of all the functionality of that channel.
4. Channel 6 describes the fact that it's parameters are affected by channel 2.
That's as good as I can do.
P.S. I have no idea whether the attached definition is a released QLC+ fixture definition or not so do with it what you wish.
Boxy
- Attachments
-
253406_bda_253406_flood_7x3_en_sreen.pdf- (11.01 KiB) Downloaded 63 times
-
- Stairville-LED-flood-panel-7x3W.qxf
- (6.72 KiB) Downloaded 152 times
-
Thomas
Thanks a lot for this. I'm not done yet but still working on it. It is crazy. The modes described in the manual have nothing to do with how the bar behaves. Here is the **still incomplete** fixture definition. To be continued the next time we play the piece where these bars are used.
- Attachments
-
- Eurolite-LED-DMX-Tube-1m-RGB.qxf
- (3.01 KiB) Downloaded 178 times